Ornament Studio · custom name ornaments

Cut (red line) Engrave name (blue fill) Engrave details (black fill)

Design

Name style

Name

Client name

Name size

Move name up / down

Letter spacing

Outline around name

Second line (optional)

Text

Font

Size

Gap below name

Size and hanger

Ornament width

Hole Ø (mm)

Add a solid backing layer (second piece, glued behind)

Engraved details

Pattern

Engraved border line

Preview materials

Ornament

Name layer

Batch

Set up an ornament above and press + Add to batch. Each one keeps its own design, name, font and size, so you can mix designs in one batch.

No ornaments yet

Add several names with the current design

One name per line. Add a second line with |, for example Emma | Baby's 1st.

Material sheet

Spacing (mm)

Sheet margin (mm)

Build the batch to preview every ornament and the cutting sheets.

No batch built yet.

Files are true size in millimetres. Import with File → Import and the ornament keeps its width.
Red lines are the cut. Blue fills are the name, black fills are the decoration. Select by colour and assign Cut, Engrave and Engrave settings for your material.
The ZIP holds one SVG per name plus nested sheets sized to the material you picked, ready to send to the P3 or M2.
Cut-out designs are all red cut lines with no engraving. The name is welded to the bar under the band, and small loose bits like the dot on an i are removed so nothing drops out.
With a backing layer, the file has two pieces: the cut-out front and a solid back. Cut the back from a contrasting material such as red or gold glitter acrylic so it shows through the openings.
Two-layer simple shapes contain the ornament and a name plaque to glue on top.
Run one test piece on scrap before cutting a full sheet, and adjust kerf in xTool Studio if pieces fit too loosely.